Cisco Switch-Konfiguration

Konfigurationsänderungen abspeichern

SWITCH#write
Building configuration...
[OK]

VLAN anlegen

SWITCH#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
SWITCH(config)#vlan 6
SWITCH(config-vlan)#name DAG
SWITCH(config-vlan)#end

Access Port in VLAN heben

Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# interface fastethernet0/1
Switch(config-if)# switchport mode access
Switch(config-if)# switchport access vlan 2
Switch(config-if)# end

Management-IP (für VLAN) anlegen

Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# int vlan 1
Switch(config-vlan)# ip address 192.168.2.100 255.255.255.0
Switch(config-vlan)# end
exit